Odyssey 96" x 36" Music Festival DJ Table with 4-Leg Kit

• Tabletop measures approximately 96" x 36" x 6.75" • Table height ranges approximately from 31" to 48" • The ATT-PRO tables can be joined together on any of the four sides to form a bigger working area. • Table legs measure 22.5" in length. • Table height can be adjusted via the height adjustable feet. Available in various other sizes. 96" x 36" (<a href="https://www.odysseygear.com/product/att-pro-9636">ATT-PRO-9636</a>) 96" x 24" (<a href="https://www.odysseygear.com/product/att-pro-9624">ATT-PRO-9624</a>) 72" x 24" (<a href="https://www.odysseygear.com/product/att-pro-7224">ATT-PRO-7224</a>) 48" x 36" (<a href="https://www.odysseygear.com/product/att-pro-4836">ATT-PRO-4836</a>) 48" x 24" (<a href="https://www.odysseygear.com/product/att-pro-4824">ATT-PRO-4824</a>) <b>Odyssey Pro DJ Table - Setup & Breakdown instructions</b> <b>Setup Procedure</b> First step, set all four risers to the desired height, tighten both Allen bolts on each riser to ensure proper security and stability. Have one or more qualify person(s) tilt and hold the DJ table securely on its longest side while the riser installation person(s) inserts each riser fully into the DJ table socket (pressure clamping jaw must be 100% in contact with the riser’s rounded tube surface) ensure each riser is fully inserted, tighten each socket hand knob until snug and give an additional 1/4 turn, then pull on each riser to confirm it is tight and secure. Carefully tilt the DJ table back upright and adjust the built-in leveling feet as needed to ensure the DJ table is level and stable. <b>Breakdown / Tear-Down Procedure</b> Tilt the DJ table onto its longest side and have a qualified person(s) hold the DJ table securely. Loosen each riser’s hand knob and remove the risers one at a time, starting from top to bottom.